When working on sliding door to replace latch assembly, heres a tip to make life alot easier.

 With help of an assistant & the slider open, loosen & remove 2 bolts- “10mm head” on the rear hinge.
Posistion a jack stand with a fender cover “to protect painted surface” below the door.
 Now you can pivot out the […]

97 Olds Acheiva with intermittent no start. Vehicle presented codes for passkey and cluster.P1573 P1629 P1641 B1024 B1027. Test for power on PRNDLE fuse 10A and INST fuse 10A.if power is not present go to power distribution diagram and test circuit supplying fuse block. If power is present remove cluster and back probe C11 and […]

The 8.0 has a problem with the chrome plating inside of the fuel rail flaking off and plugging or restricting the injectors.  This can cause a run rough or missfite condition that is difficult to isolate to one cylinder.  If you flow test the injectors you will come up with a variety of results.  This […]

To make things a little bit easier when servicing a clutch and hub assembly on one of these trucks, take a moment or two and make your self a tool to save some time. This tool is made from an old 2″ lock collar and a piece of scrap metal. Its something I all ready […]

I have noticed that a few techs have an issue regarding how to remove the door handle bezel on the Camry’s.
 
Attached are some pictures that I hope will help some techs needing to remove the door panel to access windows , window regulators and locks. 
 
When removing the door handle bezel, first remove screw behind the […]